OLYMPIA submersible pumps and motors are totally manufactured in our factory in Greece, under the most modern and well-thought design, providing good and effective solutions in the field of water supply and irrigation. 

They produced in accordance with the European norms DIN24255, precisely following the predefined production processes as described in Quality Assurance Manual according to ISO9001 Standard, thus ensuring stable and high quality products.

The pumps we provide are being used for supplying water in several  irrigation - agricultural applications, (installed in deep wells or inside water tanks).

Each submersible pump / motor before its delivery is being subject to Quality tests through the different phases of production, up to the final phase that leads to the end product. Each product is accompanied by the respective certificate of inspection and testing, the statement of compliance with the European Standards and the corresponding CE mark, the copy of Quality Assurance certificate in conformity with ISO9001 Standard, our company’s confirmation letter where we state our ability to provide at least ten(10) years spare parts, maintenance, service and technical support capability, as well as, operating installing and maintenance instructions’ manuals along with other supportive technical manuals.

Capacity:                  1,5 - 20 m3/h

Delivery Head:          280 - 15 m

Power:                       0,5  - 10 HP

Speed:                       2900 rpm

Outside Diameter:     95mm

Exit Diameter:           1 ¼" - 1 ½" - 2" 

Max. Sand Content:  100 gr/m3

Motor Connection:    NEMA

Diffuser:  Noryl

Impeller:  Noryl

Suction Hopper: AISI 304 Stainless Steel

Output Hopper:  AISI 304 Stainless Steel

Bowl:                 AISI 304 Stainless Steel

Shaft:                 AISI 304 Stainless Steel

Coupling:           AISI 304 Stainless Steel

Strainer:             AISI 304 Stainless Steel

Valve cap:          AISI 304 Stainless Steel

Flow range: 8 - 280 m3/h

Max. Head Range: 644 m.

Motor Powers : 5,5 - 250 HP

Frequency : 50 Hz (60 Hz optional)

Max. Sand Content : 50-100gr/m3

Max.Water Temperature : 30 °C (50 °C optional)

Diffuser :

Stainless Steel (AISI304, AISI316)

Impeller :

Stainless Steel (AISI304, AISI316)

Valve cap :

Stainless Steel (AISI304, AISI316)

Shaft :

Stainless Steel (AISI420)

Coupling :

Stainless Steel (AISI420)

Strainer :

Stainless Steel (AISI304, AISI316)

Flow range: 5 - 450 m3/h

Max. Head Range: 600 m.

Motor Powers : 0,5 - 250 HP

Frequency : 50 Hz (60 Hz optional)

Max. Sand Content: 50 gr/m3

Max.Water Temperature : 30 °C (50 °C optional)

Diffuser :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless Steel(AISI304, AISI316, AISI 309L, duplex)

Impeller :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless Steel(AISI304, AISI316, AISI 309L, duplex)

Valve :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless (AISI304, AISI316, AISI 309L, duplex)

Shaft :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

Coupling :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

Strainer :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

Flow range: 5 - 65 m3/h

Max. Head Range: 664 m.

Motor Powers : 5,5 - 150 HP

Frequency : 50 Hz (60 Hz optional)

Max. Sand Content: 50 gr/m3

Max.Water Temperature : 30 °C (50 °C optional)

Diffuser :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless Steel(AISI304, AISI316, AISI 309L, duplex)

Impeller :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless Steel(AISI304, AISI316, AISI 309L, duplex)

Valve :

Cast Iron (GG 20) 

Ductile Iron (GGG40) 

Bronze (ASTM B145-4A)

Stainless (AISI304, AISI316, AISI 309L, duplex)

Shaft :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

Coupling :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

Strainer :

Stainless Steel (ASTM A582 type 416-420)

Stainless Steel (AISI304, AISI316, AISI 309L, duplex)

-Rewindable  motors from 4kW up to 185 kW  -High efficiency motors provides operation cost savings

-Water cooled

-Flange under NEMA standards

-Stainless steel shaft

-Max. ambient water temperature 30°C (50°C and 70°C is optional)

-Standard voltage 380/460V - 50/60Hz (Allowable voltage tolerance ±10% )

-Variable operation revolutions by frequency convertor (over 30Hz)

-Availability to be operated by Soft-Starter

-Optional high corrosion resistive materials (AISI 304 - AISI 316 - AISI 309L -Duplex - Bronze)

-CW & CCW direction of rotation.

-Rewindable, PVC, PP,  PE2+PA winding wire

-Our rewindable motors provides long service life.

-Our motors can be operated horizontally when motors be installed in a water tank

-Heavy duty bearings with high thrust capacity. Heavy duty bearings provides the option to revolve both sides, has the capacity to carry high thrust load.

-Water lubricated radial carbon bearings. Radial carbon bearings, which have channels in its structure that makes it possible to get lubricated by water easily, provides precise bearing of rotor shaft at up and down.

 

-Chrome-plated bearing collet. Chrome-plated and precisely machined bearing collets which are located in the radial bearings operating area, have great importance for bearing the rotor.

 

- Mechanical sealing system for high sand resistance and degree of protection: IP68

Although mechanical seal is optionally used by other companies, it is always used by our company as a standard, to prevent sand and other particles to get in motors to provide long bearing life.

 

-Pressure balancing check valve. Pressure balancing check valve controls the pressure changes inside the motor. When the pressure increases, it throws water out of the motor. When the pressure drops, it filtrates the water inside well and gets it inside the motor by

the help of this check valve to balance the pressure inside. That's why pressure differences inside motor never causes membrane under motor to blow up.

 

-Practical and easy-to-mount output power cable. Connection of the power cable to body is made practically by cable seal and seal cover. Power cables can be changed easily without any damage.

 

-PT100 Overheating protection. By connecting the PT100 thermal sensors to the slot that is standardly placed on upper bearing body, motor temperature values can be easily measured.

 

-Up-Thrust ring. Provides safe operation conditions for motor by absorbing Up-Thrust loads with it's machined surface and water channels on it.

 

-Cable connection. Preventing the water inside the motor to run through the cable and reach connection parts of power cables by specially designed cable seals.

 

-Adjustment screw. Standard shaft height can be precisely adjusted by the

adjustment screw on the thrust bearing base.

 

-Membrane. Membrane minimizes the expansion pressure that is caused

by heating of cooling water's inside the motor.